Lights, Locks, Bags, and Racks

- Battery tail lamp with reflector for rear rack - Compatible with 50mm, 80mm and 19mm (center mount) - Waterproof construct IPX4 - Built-in wide angle reflectors - Meets StVZO, RKF and Danish lamp standards - Meets StVZO Z, BS, UN IVA, UN IA and CPSC reflector standards - Low battery indicator - Tool-free battery replacement

Fear no bike commute with OnGuard's saddle and accessory tether. A sturdy steel cable with permanently fastened loops at either end provides a high degree of security for your bike. 5mm thick, flexible steel cable is tough as nails, and a vinyl coating protects your bike's paint from scratches.

Disc brake compatible leg for Megarack

- Simplistic safety light designed to be seen - Easy to install silicone strap attachment is compatible with 22.2-31.8mm bars - 3 modes including 1 steady and 2 flashing modes - Powered by 2 CR2032 batteries - Lumens: 6

It's always a good idea to have backup hardware. This is a replacement hardware pack for Portland Design Works Payload or Loading Dock rear racks. - 2x P clamps - 4x nyloc nuts - 4x hex bolts

These are simple polished stainless steel struts which can be used to mount many of our racks to your bike's brake bridge or fork crown. Available in Small and Large sizes. - Small is 8.5cm long from end to end - Useful for mounting our Constructeur Rear Rack to your brake bridge. - Useful for mounting our Constructeur Rear Rack to your brake bridge. Also used for mounting our Randonneur, Constructeur Front, and Porteur Racks to your bike's fork crown. - Note: not required if you mount the rack to metal fenders, as is traditional.

Others out on the roads and paths will see you when Sunlite's TL-L340 Taillight is on your bike. It sports 3 bright LEDs, steady and flashing modes, and a long run time.

• Straight cable with PVC sleeve • One extra large loop • 3mm • Length: 2'6" • Cable only

Put it on your seatpost, put it on your seatstay, put it anywhere—Sunlite's Griplite goes everywhere. This powerful little light boasts two LEDs and runs for a whopping 100 hours! It has steady and two flashing modes, and is housed in a water-resistant body.

Put it on your handlebars, put it on your fork leg, put it anywhere—Sunlite's Griplite goes everywhere! This powerful little light has 2 LEDs and runs for a whopping 100 hours! It has steady and flashing modes and is housed in a water-resistant body.

• 2 bright Nichia LEDs • Uses 2 CR 2032 lithium batteries (included) • 100 hour run time • 3 modes: 2 flashing and 1 steady • Water-resistant silicone body

• 2 bright Red LEDs • Includes 2 (CR 2032) lithium batteries • 100 hour run time • 3 mode (2 flashing modes & steady mode) • Water resistant silicone body

• Four-digit combination • 4mm cable • Length: 3'6"

Sunlite's HL-K100 Headlight is a great light at a great price. It sports a super-bright Krypton bulb housed in a tough, water-resistant body so it's perfect for commuting year round. A no-tools-required quick-release handlebar mount is included, too.

Be seen with CatEye's Omni 3 Taillight, which uses Omni Directional Technology for 360 degrees of visibility. Three super-bright LEDs light up in three different modes so you can customize the pattern and get run times up to 200 hours. Plus, CatEye's tool-free mount makes installation a breeze.

Lock your bike's quick-release components with Kryptonite's 4-foot long Keeper 712 Combination Cable. It's a 7mm braided steel cable that offers increased cut resistance and features a pre-set combination closure. The vinyl coating protects bikes and equipment from scratches, too.

Ever wish your cable was longer so that you could lock up your bike and accessories? The Akita Cable has loops on each end allowing it to act as an extension for any other lock. These cables are made from some of the thickest, toughest and most flexible steel in the industry, so you can lock up anything you want and walk away with peace of mind.

Always on the go? Have a lot of stuff? The SteelBraid line is here to travel alongside you, on the road, at home, sports games or wherever you may go. 4' in length, the braided steel cable is sure to keep your gear safe. We added a vinyl coating to completely cover the cable and prevent rusting to protect your equipment. 12mm diameter with vinyl shell.

Replaces stock Streamliner foot to adapt any Streamliner rack (sold separately) to fit onto standard 10mm nutted wheel axles. Ideal for fixies, cruisers, urban bikes and traditional bikes without eyelets. CONSTRUCTION • Aluminum ADDED BENEFIT • Makes the Streamliner rack (sold separately) even more versatile

Make sure you have excellent rear visibility at night with the Blinky 3. This sweet taillight aims 3 bright LEDs directionally to provide visibility from up to a mile away. Its soft-touch power switch accesses flashing or steady modes for up to 100 hours of run time on the 2 AAA batteries (included). And, it includes seatpost and seatstay mounts.

Long battery life combined with simple, tool-free mounting makes MSW Mouse lights a great economical pick to be seen on the road. - Simple, tool-free mounting on bars from 22.2 - 35mm - 3 lighting modes: high, low, flash - CR2032 battery included

- 32 lumen single LED safety light - 2 modes - steady and flashing - 2 CR2032 batteries included - Water resistant design

- 8 lumen, single LED safety light - 2 modes - solid and flashing - Up to 110 hour run time with 2 CR2032 batteries (included) - Multi-fit rubber strap attachment

Sunlite's 330 Taillight helps you be seen. It sports a 100 hour run time with a 1/2 watt 3 LED system. The housing is water resistant and it has steady and flashing modes.

Lock your bike's quick-release components with Kryptonite's 4-foot long Keeper 512 Combination Cable. It's a 5mm braided steel cable that offers increased cut resistance and features a pre-set combination closure. The vinyl coating protects bikes and equipment from scratches, too.

The KryptoFlex 525 Seatsaver Cable is a 2.5-foot cable ideal for securing your bike's seat and seatpost. It's 5mm braided steel cable provides increased cut resistance and the vinyl coating protects bikes and equipment from scratches. The KryptoFlex 525 cable is 3/16-inch x 2.5-feet.

- 80-lumen COB chip LED headlight - Powered by 2 AAA batteries (included) - Can be installed horizontally or vertically - IPX3 water-resistant rating

- 20-lumen COB chip LED tail light - Powered by 2 AAA batteries (included) - Can be installed horizontally or vertically - IPX3 water-resistant rating

• Heavy duty cable with Soft durable integrated cover • Non-marring coating won`t scratch frames • Integrated KEY lock • Length: 3 feet • Cable: 10mm

• 8mm x 6ft • Vinyl coated (Water resistant) • Double ended • Heavy duty security cable