Why have your CO2 cartridges rattling around in a seat bag when you can get Xlab's X-Nut Inflation Holder and store them behind your saddle? It holds two threaded CO2 cartridges and an inflator (each sold separately) in an easy-access location. The X-Nut is compatible with Xlab's Carbon and Super Wings.
Topeak's Presta Valve Extender is the perfect solution for getting to those hard-to-reach valve stems. It's precision-machined from aluminum and is designed to fit deep-dish carbon and aluminum rims that have a depth of 60 to 90mm. And, it comes with an O-ring seal to ensure a leak-free fit.
- Ball-inflating needle for footballs, basketballs and more
The Airchecker from SKS is a fast and easy way to check your tire pressure. The swiveling head makes it a snap to reach your presta or schrader valve stem at any angle, and the backlit display with extra-large LED digits is always easy to read. This gauge measures up to 144 psi and reads in 10ths of psi.
The Super Patch Kit is comprised of a small plastic case, a piece of sandpaper for roughing up the tube and 6 peel-and-stick patches so no gluing is required. The patches stick fast thanks to 3M technology and they're thin and flexy to stretch with the tube. There's no easier way to patch a tube.
A new All-Mountain standard. Lezyne's threaded 25g CO2 cartridge for use with most Lezyne CO2 inflators. It inflates one large MTB tire (26” x 2.5”) to 40psi (2.8bar).* Sold in packs of five.
Lezyne's Classic Floor Drive Pump features a machined aluminum base with a steel barrel and piston. Oversized 3.5 inch precision gauge. 220 psi max. Extra-long, high-strength hose with aluminum couplers. Premium paint finish with varnished wood handle. - ABS2 equipped.
Easy to use, easy to control and affordable. The Mircoflate Nano gives you the best bang for your buck when it comes to quality and ease of use. Simply thread on your favorite CO2 cartridge, twist the cartridge off slightly to engage inflation and tighten it back on to shut it off. Petite power! - Compact and nearly indestructible - Easy to use and fully controllable - Patented twist-to-inflate technology - Press on to both Schrader and Presta valves - Compatible with 16 gram, 20 gram and 25 gram threaded CO2 cartridges Product includes: (1) Microflate Nano inflator head (1) threaded 20 gram CO2 cartridge
Want a super-easy way to fix a flat? If you have tubeless tires on your mountain bike, all you need is Genuine Innovations' Tubeless Tire Repair Kit. No interior repair is needed, so you don't have to remove the tire. Just plug the hole with the self-vulcanizing plugs, inflate and ride away. The kit includes an insertion tool and five rope plugs.
A reliable floor pump featuring a durable steel barrel, an auto-select head, and a stable base. Fresh air for your tires Nothing slows a cyclist down like an inappropriate amount of tire inflation. Loaded with features like a stable, tip-resistant base, a durable steel barrel, and an auto-select head, the Charger stands ready whenever your tires need a little boost. Product details - Steel construction and replaceable internals provide long-term durability - Auto-select head instantly fits both Presta and Schrader valves - Large, stable base minimizes tipping - Easy-to-read 3-inch base-mounted gauge - Max pressure 160 psi (11bar)
A versatile floor pump that allows for easy transition between high volume and high pressure settings. A pump for road and MTB The Dual Charger Pump is versatile floor pump with multiple pressure settings that let you easily inflate high-pressure road tires and larger volume hybrid and MTB tires. A quick flip of the switch moves between settings, making it perfect for riders who own both a road and mountain bike. Product details - Steel construction and replaceable internals provide long-term durability - Auto-select head instantly fits both Presta and Schrader valves - Large, stable base minimizes tipping - Easy to read 4-inch base-mounted gauge - Base-mounted switch allows for easy transition between high volume and high pressure settings - High volume setting allows for quick inflation - High pressure setting allows for easy inflation as PSI increases - Max pressure 160 psi (11bar)
Use Bontrager's Presta Valve Extenders with a deep section wheel and you'll always be able to keep things properly pumped. They must be used with a removable valve core tube.
For the perfect pressure A shock pump with an accurate, easy-to-read gauge and a thread-on design that minimizes bleed off so you can easily adjust your shock pressure. The perfect pressure takes precision. The Bontrager Shock Pump features a large, easy-to-read gauge for accurate readings, a bleed valve for pinpoint accuracy, and a thread-on design that quickly attaches to front and rear suspension shocks for a reliable, secure connection. - Easy-to-read gauge that is accurate to 400 PSI - Threaded design for a secure connection that reduces bleed down - Bleed valve reduces pressure in small increments - Suitable for use with front forks and rear shocks
Travel-ready tubeless set-up TLR Flash Can makes setting up tubeless tires at home and on the road a breeze. This easily transportable air canister inflates with a traditional pump, and a quick flip of the lever instantly releases stored air for smooth tubeless tire seating. The TLR Flash Can is designed for efficient installation of tubeless ready (TLR) tires without the need for a compressor. Product details - Inflates tubeless ready (TLR) tires without a compressor - Holds up to 160PSI (11 bar) of air pressure - Inflate Flash Can with any Schrader compatible floor pump - A simple flip of the lever releases stored air - Unique 'flash charge' function rushes air into tire - Auto-select head instantly fits both Presta and Schrader valves Specifications - Pump type: Floor - Valve: Presta/Schrader - Gauge type: No gauge - Max pressure: 160psi - Frame mounted: No
Why have your CO2 cartridges rattling around in a seat bag when you can get Xlab's Sonic Nut Inflation Holder and store them behind your saddle? It holds two threaded CO2 cartridges and an inflator (each sold separately) in an easy-access location. The Sonic Nut is compatible with Xlab's Sonic and Turbo Wings.
$11.99 - $14.99
You'll ride with peace of mind when you pack a can of Vittoria's Pit Stop Tire Sealant. It contains pure latex foam sealant and compressed air to quickly inflate and repair your tire so you can get on with your ride. Available in three sizes for varying tire volumes: - Road Racing: inflates 21-28-inch tubulars up to 94 psi and 700c clinchers up to 87 psi so you can ride, instead of walk to the closest pump and top off the tire to full pressure. - 75mL: Repairs and inflates low-volume MTB tires in less than a minute. - 100mL: Repairs and inflates meaty 27.5-inch tires and cross country 29-inch tires in less than a minute.
- Solution for mounting pumps and C02 inflators on frames or seatpost - Soft rubber block and Velcro loops hold pumps tightly
The world’s first CO2 inflator with tire gauge provides tire-inflation and tire-pressure measurement. The angled head fits Presta and Schrader valves and a special feature allows the user to adjust the flow while filling the tire. Dual-end design allows for one-cartridge storage. - CO2 inflator that features a gauge as well - Flow is adjustable using special feature - Compatible with both Presta and Schrader valves - Presta/Schrader with integrated dust cap, Push to inflate - Gauge: Reads 160 psi / 11 bar, 1-1/2” analog - Engineering-grade polymer - Weight: 45g /1.59 oz - Size: 6.5 x 5.2 x 3.3 cm / 2.5” x 2” x 1.3” - Accepts threaded cartridges - CO2 cartridges sold separately
Topeak's Joe Blow Max HP quickly inflates tires with a durable steel barrel, a sturdy composite base, a padded handle, and a tight-sealing TwinHead that fits Presta, Schrader and even Dunlop valves. You'll also appreciate the extra-long hose and big, easy-to-read gauge.
The Topeak JoeBlow III continues the tradition of setting the benchmark for floor pump durability and performance while ushering in upgrades with an enlarged 3-inch chronograph-inspired gauge and hammer-style TwinHead DX pump head. A durable steel barrel and base as well as an ergonomic padded handle make inflating tires a breeze. - Presta / Schrader / Dunlop-compatible - Max 160psi / 11bar - Volume per stroke: 317.5cc - 3.7lbs / 1.68kg - Ball and bladder needles included
This unique mountain bike specific floor pump features a super-sized barrel that inflates tubes nearly 50% faster than normal floor pumps. It delivers the higher volume required for large off-road tires. The extra-sensitive 3" easy-to-read low pressure analog gauge helps dial in the proper pressure while the large steel base provides stability. - TwinHead DX5 works with Presta, Schrader, and Dunlop valves - Oversize padded handle - Barrel/Base: Painted steel - Gauge: 60psi / 4bar, 3” middle mount analog - Volume Per Stroke: 722 cc - Added Features: Attachments for inflating sports balls and bladder heads, Hose dock - Size: 72 x 26.6 x 14.2cm / 28.3” x 9.1” x 6.7” - Weight: 2.3kg / 5.07lb
Topeak's Peakini II is a powerful mini pump that's ideal for road and trail use. It sports a reversible head so you can pump both your Schrader and Presta valves with ease. And, its highly efficient, single action design and T-handle mean you'll be back out riding after a flat quicker than ever.
Topeak's Pocket Rocket boasts an aluminum barrel for superb function, durability and max pump power, while its plastic handle ensures pumping comfort. And, its aluminum thumb-lock head fits both Presta and Schrader valves.
Pssstttt. Tired of hearing that when you disconnect your shock pump? Well, hear it no more thanks to Topeak's Pressure-Rite. It's a must have for suspension fanatics as its ingenious design prevents air loss when adjusting shock and fork pressure. It's also available in a Presta version, perfect for disc wheels.
Topeak's Presta Valve Extender is the perfect solution for getting to those hard-to-reach valve stems. It's precision-machined from aluminum and is designed to fit deep-dish carbon and aluminum rims. And, it comes with an O-ring seal to ensure a leak-free fit.
Topeak's Road Morph G is the perfect answer for riders who've had trouble deciding if they want a frame or floor pump. The Road Morph is both! For maximum pumping power, it features a high-volume aluminum barrel, a fold-out base, a long hose with built-in gauge and a T-handle. Of course, it fits Presta and Schrader valves and a frame mount is included, too.
This mini sized gauge can be attached between the pump and valve to read pressures while pumping or used alone. Provides pressure readings up to 160 psi / 11 bar. Rotating gauge is easy to read and the head works with Presta, Schrader or Dunlop valves on bikes / motorcycles / car tires, forks or shocks while the Thumb Lock lever ensures an airtight seal. An air release button allows fine tuning of pressure. - Pump Head Compatibility: Presta / Schrader pumps - Tire Valve Compatibility: Presta / Schrader / Dunlop valves - Gauge: Reads 160psi / 11 bar, 1-1/2" analog - Pressure Tuning: Air release button - Material: Engineering grade polymer / aluminum - 360 degree rotatable gauge, Dust cap - Size: 6.2 x 5.8 x 3cm / 2.4" x 2.3" x 1.2" - Weight: 50g / 1.76oz
Topeak's SmartGauge D2 boasts a digital readout that goes up to 250 psi and it's compatible with Presta and Schrader valves, as well as shocks and suspension forks. The head rotates 180 degrees to get in tough spots, and an air release button helps you dial in the perfect pressure.
Topeak's incredibly compact CNC aluminum Threadlock Upgrade Kit threads directly to Presta or Schrader Valves with no need to change internal parts or use extra adapters. It fits most rubber pump hoses, and is compatible with Topeak JoeBlow Ace, JoeBlow Mountian, JoeBlow Sport II, JoeBlow Max II and JoeBlow Max HP.
Being elite means making no compromises when pursuing perfection...everything matters. Mounting your gear in a position to minimize drag is just one tip for performance. The Tri-BackUp Elite is specifically designed for saddles with angled rear rails. - Material: CNC aluminum - Hydration Capacity: One or two bottles (up to 750cc each) - Compatibility: Ninja TC Road, Ninja Pouch+ Road Ninja CO2+ Tri-Cage series - Mount: V rail section of saddle Compatible with CrMo, Ti, & Carbon rails - Max Load: 2.5 kg / 5.5 lb - Added Features: 1 Micro AirBooster and 2 16g CO2 cartridges included - Angle adjustable - Size: 8.6 x 7.6 x 7.4 cm / 3.4” x 3” x 2.9” - Weight: 102 g / 3.60 oz (Total) 88 g / 3.10 oz (w/o Inflator Bracket)
Page 1 of 5 Next page