Material: premium quality 7075-T6 alloy topbolt plus washer Size: M24 x 1.5mm pitch (fits to 2011/ 2012/ late 2013 and 2014 forks) Weight: 33g (1.12oz : 0.07lbs)
WeThePeople's Arrow 115 Grips have the perfect texture and density to give you new confidence while railing it on the bike. Material: VEX rubber compound Rubber durometer: 30° Size: 115mm x 28mm Specials: soft angled rib design with medium-sized flange; includes WeThePeople nylon barends
WeThePeople's Arrow 146 Grips have the perfect texture and density to give you newfound confidence while railing it on the bike. Material: VEX rubber compound Size: 146mm x 28mm Specials: soft angled rib design with medium-sized flange; includes WeThePeople nylon barends
Keep your straps tidy and out of your way, using WeThePeople Cable Straps. They're easy to install and look good. This 10-pack helps keep that ride clean and tight. - 10 straps included
WeThePeople's Compact Headset gives you super-smooth steering and the ability to get those barspins and tailwhips dialed. Specs: top cap/ first spacer designed as one with 3mm, 5mm, 8mm and 10mm alloy spacers Special: includes all necessary hardware (washers, bearings, and spacers) Weight: 104g (3.7oz)
WeThePeople's Drops Bar Caps protect your barends and grips from damage when you have to bail on a less-than-perfect trick. The lightweight, CNC'ed aluminum caps bolt to your bars and keep things from getting scraped up when the bike hits the ground. • 6061-T6 aluminum
CNC-machined from 6061-T6 alloy, these WeThePeople Drops Bar Caps simply go over the end of your bars and attach with a 2mm grub screw. Weighing next to nothing, there isn't a lighter way to prevent your bars from getting scratched up.
$32.99 - $33.99
WeThePeople's Feelin tire has a slick-tread design with a durable, grippy rubber compound, making it an awesome choice for the street and park.
WeThePeople's Grippin tire is an excellent all-around tire. With a semi-tread design and a durable, grippy rubber compound, this tire can rail dirt berms and vert ramps alike.
$49.99 - $50.99
The Pathfinder Sprocket is much thicker than anything else WeThePeople had made before. Its 8mm-thick beef and unique 9 sided design integrates the sprocket mounting location into the spoke pattern, resulting in a super-clean looking sprocket with plenty of strength and longevity, even for the most savage rider out there.
$36.99 - $46.99
Much like the rest of the Patrol range, the Patrol Sprocket is based on the classic racing sprockets of the past. Ours uses a high-quality CNC construction and offset teeth for a perfect chain line. This thing was designed to crank fast, so of course we had to offer a 33T version for the guys that really like mashing the pedals. Bolt one onto your bike today and see how fast you can go.
WeThePeople's Patron fork is all about choices. The 7mm full-investment casted heat-treated hollow dropouts are what make this fork so special and are offered in either a traditional 35mm offset or a more street orientated 25mm version for all the front-wheel jedis out there. This is the go to choice for most of the WTP pro team, so you know it's got to be good. • Material: Full-liquid post heat-treatment on 4130 “M2“ chromoly • Steerer Length: 170mm • Offset: 25mm or 35mm • Dropout: 7mm, full investment cast, heat-treated 4130 chromoly, 3/8'' axle • Fully CNC’d steerer, single butted integrated crown race designed to work with integrated headsets with a 45° bearing
Check out the dinosaur skin-like texture of WeThePeople's Raptor grips! Like a raptor, you can wrap your claws around these grips and let the good times roll. The soft, VEX rubber compounds conforms perfectly to your hand, and holds up great to long days on the bike. • 150mm Long, 27.8mm Diameter • 30 durometer rubber • Low flange design • Includes WeThePeople nylon barends
$35.99 - $57.99
WeThePeople's Socket Pivotal seat post is made from 6061 aluminum for a perfect blend of strength and weight savings. It works with all Pivotal seats and comes in the perfect color and size to match your bike. Plus, there's a 17mm socket head built into the bottom of the post for park-side adjustments to your wheels.
Ground breaking riding deserves a fork so burly fork that it can literally break the ground, should the need arise. WeThePeople's Sterling fork is masterfully crafted to meet the insane demands of team rider, Pete Sawyer. The Sterling can handle it all, and it looks good doing it. Find a matching color scheme on the Sterling signature frames too! • Material: Full-liquid post heat-treatment on 4130 “M2“ chromoly • Steerer Length: 170mm • Offset: 32mm • Dropout: 6mm laser cut & CNC machined, heat-treated 4130 chromoly, 3/8'' axle • Fully CNC’d steerer, single butted integrated crown race designed to work with integrated headsets with a 45° bearing
Protect your bars and prevent your grips from getting shredded with WeThePeople's Supreme Bar Ends. CNC machined from 6061 aluminum, these tough, bolt-in end caps protect your investment from tons of abuse when you have to jump ship on an imperfect execution of a trick. Simply slide them into the ends of your handlebars and tighten them up. Then, go nuts!
WeThePeople's Team Pivotal seatpost is made from 6061 aluminum for a perfect blend of strength and weight savings. It works with all Pivotal seats and it's 200mm long for plenty of adjustability.
Some riders will tell you "If it ain't steel, it ain't real". Well, if that is the case then these WeThePeope Toxic Pegs are about as real as it gets. Made of heat-treated 4140 chromoly and designed with a slimmer, 34mm diameter, the famous Toxic Peg is built to last. Now slightly longer at 4.25 inches to help you lock into grinds and get that extra perch on hard 180s.
WeThePeople's Tripod Seatpost is made from strong, lightweight 6061 aluminum. The Tripod design is stronger and has more structural support than Pivotal seat/post combos. It uses a 3-point mounting system, where two rear supports press into channels underneath a Tripod seat, and a single bolt up front secures the system.
WeThePeople's Utopia range was designed to provide strong reliable products that still have the necessary features to work perfectly for flatland riding, as well as pretty much everything else. • Material: Full-liquid post heat-treatment on 4130 “M2“ chromoly • Steerer Length: 170mm • Offset: 15mm • Dropout: 5mm, laser cut and CNC machined, heat-treated 4130 crmo, 3/8''(10mm) axle • Fully CNCed single butter steerer, integrated crown race designed to work with integrated headsets with a 45° bearing
Sunday's Cornerstone Grips rock traditional styling, current branding, and come in at 150mm in length with plenty of color options. It's not a bad idea to keep an extra pair around.
Made to Sunday team rider, Mark Burnett's specific dimensions, the Excelsior Bar is truly a signature product. It features a 20mm cross bar and has been post-weld heat-treated for bomber strength. They come with a limited warranty against manufacturer’s defects, ‘cause Sunday’s got your back. - Height: 9.25 inches - Width: 27.5 inches - Backsweep: 12 degrees - Upsweep: 2 degrees - Weight: 2.2 lbs.
The product designers at Sunday worked closely with Jake to nail down a grip that is perfect for him. Jake's grip comes in at 160mm and features a gradually increasing rib width. This grip can be run either way, depending on which side you prefer. The grip also features a tapered core for comfort.
Most of the Sunday team has been riding guard sprockets for a long time, so it was just a matter of time before they made their own. The Knox sprocket is made of 7075 aluminum and comes with a full guard on one side of the sprocket. It’s designed to fit larger chains like half-link chains so it’s compatible with any BMX drivetrain you have or want. It’s made super strong and will help protect your chain from being hit when slipping off a rail or messing up on a crankslide. - Machined out of 7075 aluminum - Full guard on one side of the sprocket - Designed to fit larger chains like half-link chains - 6mm thick
In BMX racing, that first sprint from the gate is the most important part of the race. Shimano knows this, so their DXR cranks are unbelievably stiff, perfect for getting out in front for the holeshot. They borrow Hollowtech II technology from the Saint downhill cranks to make them rigid, light and super tough. They sport a narrow Q factor for smooth pedaling and steel pedal inserts for durability. When 2nd place just won't do, DXR is the answer.
Radio PRO Leon Hoppe's signature 47 Sprocket Guard is made to take a real beating. Featuring an integrated 8mm thick alloy guard and a robust CNC machined construction; if you're looking to get tech as hell and not break your chain, we suggest investing in one of these.
The Radio Axis sprocket is CNC machined out of the highest quality 6061-T6 alloy and is 6.35mm thick to ensure that it can hold up to some real abuse. Ridden by most of our team, this amazing sprocket comes in 25t or 28t and is available in our wild Sandblasted Purple fade finish. - Material: 6061-T6 alloy, full CNC machined - Borehole: fits on to a 24mm spindle, comes with adaptors to fit 19mm and 22mm cranks. - Thickness: 6.35mm - Sizes: 25t or 28t - Specials: strong 6.35mm thick full CNC alloy sprocket with x4 rotation holes, supplied with adaptors to fit any crank on the market - Weight: 25t: 90g (3.20oz)
Introducing the BOSS bar. Aaron Ross’ new signature handlebar now features a 9.125-inch rise along with a traditional 7/8-inch crossbar tubing for superior strength and durability on taller bars. SPECS - 9.125-inch rise - 29-inch width - 12° backsweep - 2° upsweep - Multi-Butted 41-Thermal® processed 4130 chromoly - Weight 34.6 oz
A classic knobby version of the Aitken signature tire. Traditionally a more dirt-specific tire but the tire’s fast rolling center tread allows it to be used on all terrains. - 20 × 2.35 only Single ply casing
Mike Aitken's popular signature tires for street and dirt. Ideal for use at high speeds. - 20 × 2.25, and 20 x 2.45 Dual ply casing
Page 1 of 4 Next page