Filter By:
- Bar Ends (17)
- BMX (68)
- Bottom Brackets (224)
- Brakes/Levers/Pads (684)
- Cables (222)
- Cassettes/Freewheels (132)
- Chainrings (285)
- Chains (151)
- Show More Categories
- Cranksets (276)
- Derailleurs (176)
- Forks (199)
- Groups (29)
- Handlebar Grips/Tape (367)
- Handlebars (269)
- Headsets (161)
- Pedals (367)
- Saddles (359)
- Seatposts (116)
- Shift/Brake Combinations (69)
- Shifters (132)
- Shocks (30)
- Stems (163)
- Other (2102)
- Show Fewer Categories
- Show More Brands
- Show Fewer Brands
- Show More Sizes
- Show Fewer Sizes
- Show More Model Years
- Show Fewer Model Years
Parts

$17.99
absoluteBLACK Chainring Bolts are used to mount chainrings to the crank arms. Bolts are crafted from 7075 T6 aluminum and hard anodized for durability.
- Bolts use a Torx T30 interface for greater reliability
- Short bolts are used for the following chainrings: 104 BCD oval 34/36t, 104 BCD round 32/34/36/38t, and bashrings
- Set of 4

$74.99 - $78.99
absoluteBLACK Oval 104/64 BCD Chainrings greatly improve traction and climbing abilities. They are designed for use with all cranksets with a 104/64 BCD interface, including Shimano, SRAM, Race Face, FSA, and more. These chainrings allow you to run a 1x system without chain retention issues. The specially designed narrow-wide tooth profile keeps the chain snug, allowing you to leave your chain keeper in the garage. They are crafted from CNC machined 7075 aluminum and feature an anodized finish for exceptional durability. Ovality has been optimized for each chainring size, ranging from 10.2-14.4%, with timing of 110.5-116.3° after TDC (top dead center).
- Oval shape reduces stress on knees, helps to keep your legs fresh, and does not feel any different while riding
- The unique, patent-pending narrow-wide tooth profile keeps the chain in place
- Teeth have been 3D-machined for ultimate mud shedding and quieter operation
- Provides excellent weight-to-strength ratio
- 9, 10, 11, and 12-speed Eagle compatible
$118.65
Wheels Manufacturing's PressFit 30 Bottom Brackets are an excellent direct replacement for SRAM, FSA and other PressFit 30 BBs. They are 100% made in the USA with machined aluminum cups for superior durability and your choice of standard sealed, angular contact or ceramic bearings (this model has sealed bearings). Wheels Manufacturing also exclusively uses Enduro bearings for excellent performance and longevity. Other great features of these stellar BBs include a 12% increase in bearing strength over standard models; serviceable bearings; dual exterior silicone rings for easy installation and to eliminate creaking; double-lip bearing seals; and even the highest quality grease appropriate for bottom bracket use and also more of it for smoother running and maximum durability!
$15.23
Aluminum headset stack spacers precision cut to ensure proper headset function.
- Precision cut for proper function

$54.99
Platform pedals with a durable nylon design and replaceable pins for consistent grip.
Confident and durable
From enduro to dirt jumpers, many riders prefer flat pedals, but no matter where you ride, you'll appreciate the benefits of the Line Elite MTB pedal. It features a rugged nylon body and virtual concave platform with replaceable traction pins, so every time you place your foot your shoe stays put.
And because long-lasting performance matters, they're built with durable axle and sealed cartridge bearings that hold up to impacts and pedal strikes.
Product details:
- Durable nylon body with a proven shape for comfort and confidence
- Virtual concave design with pin placement secures your shoe for pedaling and descending
- Durable axle spins on sealed cartridge bearings
- Replaceable steel traction pins
- Install with 8mm hex wrench
Features:
Virtual concave design
The steel pin placement on the durable nylon body creates a virtual concave design to securely grip any shoe.
Easy maintenance
The steel traction pins are replaceable and a rebuild kit is available to keep your pedals spinning.
Threading: 9/16" (15mm)

$29.99
- The ATAC 13/17° cleat works with all TIME mountain pedals.
- Included with all mountain pedal models numbered "6" and higher
- Release angles of 13 degrees or 17 degrees depending on how the cleat is set up on the shoe
- Compatible with all two-hole cycling shoes.

$95.00
- Oversized, hollow, steel axle, is lightweight yet rugged enough for any trail condition.
- TIME's clamping system makes clipping in super easy.
- Two release angle options (13° or 17°) along with a self-cleaning design that means you'll always be able to clip in – even in the muddiest of conditions.
- Pedal Material: Composite
- Pedal Weight: 190g
- Cleat Compatibility: ATAC
- Spindle Material: Steel
- Pedal Bearing: Ball bearings
- Pedals Thread: 9/16''

$23.00
- Developed for the TIME XPRO & XPRESSO road bike pedal range.
- They allow angular and lateral freedom in order to respect the natural movements of your legs and joints.
- You can also adjust the Q-factor (by switching the cleats)
- The Bi-material brings more durability when walking with the cleats.
- These cleats are the stock cleats included with all XPRO & XPRESSO pedals.

$41.99 - $48.99
Really popular solid selling half link chain. Extra wide and heat-treated mushroomed pins, stronger rollers and heat treated side plates provide maximum strength and durability.
- 1/8" size, includes 98 links and 2 master pins
- Colored chains are Teflon coated for low friction
- Compatible with 8T driver and up
- Links (links): 98
- Color: Pink
- Width: 1/2 x 1/8"
- Drivetrain Speeds: Single Speed
- Chain Connection Type: Pressed Pin
- Half Link Chain: Yes

$55.95
A layer of gel across the top gives an additional level of relief to the Cite X Gel. It was designed for recreational riders who spend a half-day on the bike or less, ride nearly upright with lots of weight against the saddle, prefer the closest thing to a pillow, or have significant lower back pain.
A completely seamless, heavily contoured top with a large cutaway will hit and miss in all the right places. Shock-absorbing elastomers molded into the saddle base create the effect of springs without any mechanical devices. They also help eliminate vibrations from the road or surfaces that ordinarily get transferred straight to the spine. A durable synthetic top with rear graphics is easy to maintain and will look new for years.
- Seamless, synthetic top
- Center cutaway with rear relief channel reduces contact points with soft tissue areas
- Thin gel layer for added comfort
- Length x width: 274mm x 173mm
- Weight: 479 grams; 16.9 ounces
- Rails: steel

$89.95
Ridden and universally loved around the world, the Terry Fly is the kind of saddle you just don't think about. We've sold them to everyone from pro rider to Silicon Valley entrepreneurs. It's a favorite of RAAM riders and randonneurs, and has been hailed by journalists as the most comfortable saddles for men.
The Fly Cromoly Gel version takes comfort up a level with the addition of a thin gel layer along the top, making this a wonderful saddle for endurance/distance riders. It's made in Italy, completely seamless, and contoured to support sit bones and relieve pressure in key areas.
- Smooth Dura-tek with screen-printed accent
- Completely seamless across saddle top to reduce the potential for chafing
- Thin gel layer for added comfort
- Center cutaway with rear relief channel that reduces contact points
- Length x width: 277mm x 140mm
- Weight: 321 grams; 11.3 ounces
- Rails: FeC alloy

$139.95
Terry's award-winning FLX Gel saddle for women offers the best in split saddle engineering. Perfected by our saddle partners at Selle Italia in Italy, this novel approach allows the saddle a small degree of additional flexibility in addition to relief channel comfort. Additionally, the FLX Gel has a thin layer of gel on top of the foam base.
If you find the Terry Butterflies are too wide or too padded, this saddle line is an excellent alternative. We recommend the FLX Gel to elite riders who prefer a lightweight, lightly padded saddle, but with the Terry comfort factor dialed in.
- Perforated black leather with thin gel insert
- Complete cutaway from front to back for added comfort and saddle flexibility
- Length x width: 260mm x 142mm
- Weight: 258 grams; 9.1 ounces
- Rails: Manganese

$31.99
Sunlite's Adjustable Quill Stem puts your bars right where you want them. This wonderfully easy-to-use stem adjusts from 0 to +50 degrees—more than enough to help you find your ideal position. And, the 2-bolt clamp holds securely holds your bars.

$43.99
• Aluminum
• Coil spring provides plush suspension
• Adjustable pre-load design
• Micro-adjust seat clamp
• 450 grams

$47.99
Sunlite's Adjustable Stem adjusts from 0 to +60 degrees so that you can place your handlebars wherever they are most comfortable. It boasts light and durable aluminum construction with steel bolts. It fits on 1- and 1 1/8-inch forks and accepts 25.4mm- and 31.8mm-diameter handlebars too, with included shims. Plus, its 2-bolt clamp makes changing bars easy and holds fast.

$21.99
•Mountain and road touring cantilever design
•Forged aluminum construction
•Linear spring with quick tool adjust
•185g each

$27.99
- Bulldog-style long-reach side pull brake
- Forged alloy construction
- Rear caliper only
- 238g each

$15.99 - $19.99
When you need to move your handlebars up, install Sunlite's Chromoly Quill Stem Extender. One end goes inside the steerer tube and your quill stem inserts into the top. It provides 8 1/4 inches of rise and is compatible only with quill stems and steerer tubes.

$11.99
• Fits most handlebars
• 4-piece set
• Durable, soft foam
• Includes end plugs
• 2x340mm 2x125mm

$31.59 - $45.99
- Heavy duty steel construction
- Variety of rises offered
- Due to size some of the larger handlebars are freight intensive
Page 1 of 215
Next page