Filter By:
- Show More Brands
- Show Fewer Brands
- Show More Sizes
- Show Fewer Sizes
Brakes/Levers/Pads

$21.99
•Mountain and road touring cantilever design
•Forged aluminum construction
•Linear spring with quick tool adjust
•185g each

$27.99
- Bulldog-style long-reach side pull brake
- Forged alloy construction
- Rear caliper only
- 238g each

$47.99
Shimano's SM-RT64 disc brake rotors deliver powerful and consistent braking performance in all riding conditions. SHimano's Center Lock mounting system makes installing and removing disc brake rotors quick and easy thanks to the spline mount and lock ring design.
- Compatible with both resin and metal pads
- Includes external type rotor lockring

$47.00 - $55.00
The CenterLine design provides a smooth, consistent, and quiet running braking surface. Rounded edges make for easier wheel installs and are UCI-compliant.
- Compatible with both road and mountain bike brakes
- Rounded edges are UCI-compliant and allow for easier wheel installs
- Hub interface: CenterLock
- Rotor Type: Centerline

$27.00
Original equipment pads for no-compromise disc brake performance.
- Steel backed organic pad is quiet
- Each pad kit includes two pads, a pad spreader spring, guide pin and clip
- For use with Level, Level TL, Level T, Level Ultimate, Level TLM (B1, 2020+), DB, Elixir, and 2-Piece Road

$12.49 - $19.99
Trying to get a little extra traction on shifters and brake levers has inspired home-brew mechanics to experiment with skateboard deck tape, hot glue, or slide on brake lever grips. Katie Compton actually went so far as to combine sand and superglue to ensure maximum grip in any conditions. While those solutions are pretty kick-ass, we try to make it a little easier with our Lever Grippies. Just stick ‘em on for more sticktion.

$39.89
Compatible with caliper and cantilever brakes
- Forged aluminum lever and body
- Ergonomic 2-finger lever design
- Return spring with reach and cable tension adjust
- Hinged clamp allows installation without removing grips/tape
- Fits 1.5-1.6mm brake cable type
- 90g pair

$11.89
- Suitable for light use applications
- Good performance at low temperatures
- High-density ceramic organic compound for extended pad life
- Low rotor wear
- Extremely quiet

$6.99
- Pad Attachment Style: Threaded Post
- Rim Compatibility: Standard
- Intended Brake Type: U-Brake
- Pad Type: One Piece

$8.99
One of the most important goals that Odyssey had when they sat down to work on new braking designs was to make the whole system easier to install (and remove) without sacrificing performance. They also wanted to be sure that every component would be very affordable too. The Ghost Pad addresses the hassles of brake pad installation by eliminating the traditional dome shaped washers used for toe-in. The pad improves stiffness by building the toe-in into the pad shape and utilizing a solid extruded aluminum frame at its core. The Ghost Pad’s assembly consists of simply lining it up with the rim and tightening down an M6 female bolt. Comes stock on the Springfield brake.
SPECS Hardware:
- In-bound bolt, 5mm Hex Key, M6x1.0 Thread
- Pad Material: Black (standard) or Clear Rubber (Soft)
- Weight: 1.0oz / 28g (pair)

$27.99
The M2 lever works with a single cable or Odyssey’s patented dual cable system. The M2 cable system improves braking power for GYRO users.
- Right hand only (works flipped on the left)
- M2 specific upper cable and single cable coupler included.

$19.31
Clamps for mounting Magura disc brake levers to the bar. Does not include mounting hardware, clamp only.
- Sold individually
- Stock on MT2, MT4, MT5, MT7 and MTS

$89.00
- Entry level to the MAGURA MT world with all of the high-tech features of German engineering skill such as lightweight Carbotecture components and the improved MAGURA disctube for safe stopping on tour and in the city
- suitable for mounting left or right

$50.40
Magura Storm SL.2 Rotor - 6-bolt silver
The Storm SL.2 disc brake rotor combines minimal weight with excellent braking performance. Perfect for sporty use.

$19.00 - $30.00
To keep your Avid brakes functioning properly, check your pads for wear and replace them when necessary. Organic compound pads are softer for quieter braking and increased modulation, while metallic pads dissipate heat better and last a bit longer. Two pads, one retraction spring and a mounting bolt are included (enough for one brake) in each pad set. And, choose an aluminum backing plate if you're really counting the grams.

$24.99 - $30.00
To keep your Avid brakes functioning properly, check your pads for wear and replace them when necessary. Organic compound pads are softer for quieter braking and increased modulation, while metallic pads dissipate heat better and last a bit longer. Two pads, one retraction spring and a mounting bolt are included (enough for one brake) in each pad set. And, choose an aluminum backing plate if you're really counting the grams.

$43.00
Zipp's Tangente Cork Brake Pads are perfect for Zipp wheels with carbon braking surfaces. They are made of a composite cork polymer for consistent brake response and to reduce glazing from the intense heat caused by braking on carbon. As a result, the Tangente cork pads avoid the brake pulsation produced by residue buildup from rubber pads and can even eliminate pulsation from rims with previous buildup. These pads have a unique shape with more material in the front to improve durability and shed water. Although the composite material wears similarly to low-temperature rubber compounds, the Tangente cork pads last longer than most rubber carbon-specific pads because of the shape and 0.5 mm greater overall thickness.

$47.00
Zipp's Tangente Platinum Pro Evo Brake Pads are made for wheels with carbon braking surfaces. These fine pads provide confident, smooth braking power in all conditions and they are specially made for long life. They have a large surface area for maximum stopping power and deep grooves to shed water from the rim and ensure the Evos grip great even when it's wet. These stoppers are also thin so they'll work nicely on time trial and triathlon bicycles with integrated brakes and tight clearances.

$24.99
This is a set of universal, removable brake hardware for WeThePeople bikes. Did you lose yours after you took it off? Yeah, we did, too.

$27.99
- Top mount levers for use with caliper or cantilever brakes
- Forged aluminum
- Hinge clamp style
- Return spring and reach adjustment
- Black
- 90g / pair

$19.99
Bred from the racetrack, the newly formulated Performance Resin Pads are our highest performing pads to date.
- New Performance Resin Compound
- Fits all TRP 2-Piston Calipers
- Increased Heat Stability
- Shorter Bed-In Process
- Provides a lighter lever feel
- Increases power transfer with a snappy initial bite
- Sold Per Wheel

$24.99
TRP Metallic pads are made up of hardened metallic ingredients, which are bound together with pressure and heat.
Metallic pads fade at a higher temperature than their resin or semi-metallic counterparts and offer better performance in wet and muddy conditions.
Sold per wheel
TRP compatible brakes:
Hylex RS PM, HY/RD, Spyre, Spyke, Parabox 2012 and Select Tektro Brakes
Tektro Compatible Brakes:
Draco, Auriga comp, Gemini
HD-M740 / M730 / M520 / M521 / M510 / M500 / M501
HD-M290 / M291 / M285 / M286 / M275
HD-T710 / T520 / T530 / T290 / T285 / T525
HD-E715 / E530 / E525 / E520 / E500
MD-M500 / M300 / M280
MD-C510 / C400

$19.99
Semi-Metallic replacement pads for the DH-R EVO, G-Spec DH-R, Quadiem, Slate T4, Slate G-Spec and "Select 4-Piston Tektro Brakes"
- Semi-metallic compound for minimal noise with maximum power
- Fits all TRP four piston calipers and Tektro four piston calipers
- Color: TRP red
- Sold per wheel
- Replacment pad for Tektro Q10YS

$24.99
Sintered Metallic replacement pads for the DH-R EVO, G-Spec DH-R, Quadiem, Quadiem, Slate T4, Slate G-Spec and "Select 4-Piston Tektro Brakes"
- Sintered Full Metallic compound
- Fits all TRP 4-Piston calipers and Tektro 4-Piston calipers
- Color: Gold
- Sold per wheel
- Replacment pad for Tektro Q11TS

$3.99
Can be used to provide extra clearance between brake caliper and spokes.
Spacer should be placed between rotor and hub.
Page 1 of 23
Next page